Cannon 3035 User Manual

Setting Up a Computer for Printing

U

s

ing an App

leT

alk Netw

or

k 

(Maci

ntosh)

After you have completed the machine protocol settings, install the printer driver on 
the Macintosh that will do the printing, and then make the settings for the print 
destination.

Specify the following settings according to the instructions in the manual for each 
driver.

IMPORTANT

 

You need to use optional equipment to print via an AppleTalk network. For the equipment 
needed, see "Optional Equipment and System Requirements," on p. 1-2.

■ If you want to use the UFR II printer driver

1. Installation of the UFR II printer driver

See the Mac UFR II Driver Guide.

2. Print settings

Set the machine as the print destination.

■ If you want to use a PS printer driver provided by Apple Computer, Inc. with 

1. Installation of the PPD file

See the Network Quick Start Guide. 

2. Print settings

Set the machine as the print destination.

3. Selection of the printer name

Select either of the following names displayed in the Macintosh screen. ('xxx' indicates 
the name of the printer entered in [Service Name].)

- [xxx_D]: the print job is printed without spooling to the hard disk of the machine.

- [xxx_S]: the print job is printed after it has been spooled to the hard disk of the 

machine.