Cannon 3035 User Manual

Page of 216
Network Connection Problems and Remedies
7-2
7
T
roub
le
shoo
ti
ng
Network Connection Problems and Remedies
This section describes the causes of network connection problems, and how to 
resolve them.
Unable to Set up a Network
 
Cause
[Change Settings/Display Connection Confirm.] is set to 'Off'.
 
Remedy
Set [Change Settings/Display Connection Confirm.] to 'On'.
<Check the network connection.> is displayed on the control panel.
 
Cause 1
The machine and cable are not properly connected.
 
Remedy
Turn OFF the machine's power switches, check that the machine is connected 
to the network using the proper cable, and then turn them ON. (See 
"Connecting the Machine to a Computer or Network," on p. 2-3.)
 
Cause 2
[Change Settings/Display Connection Confirm.] is set to 'On', although the 
machine is not connected to a network.
 
Remedy
Set [Change Settings/Display Connection Confirm.] to 'Off'.
The machine automatically connects to a destination other than the intended destination via 
its dial-up access (when a dial-up router is connected to your network).
 
Cause
The machine periodically or temporarily communicates with devices on your 
network. If a dial-up router or NetWare file server is on the network to which the 
machine is connected, the machine connects to a destination other than the 
intended destination, depending on the settings of the machine or dial-up 
router. This may result in subscriber line charges and call charges.
Examples:
The file or mail server's host name or IP address set on the machine does not 
exist on the network.
The DNS server exists on an external network.
You attempt to access a device connected to an external network, if the 
device's information is set on the DNS server on the network to which the 
machine is connected.