Cannon 3035 User Manual

Protocol Settings

Usin

g a 

TCP/IP Netw

or

k

IMPORTANT

 

•

Up to 100 MAC addresses can be specified.

•

If you select [On] for <Apply Settings>, you will become unable to access from 
MAC addresses which have not been specified. Check the MAC addresses 
carefully before specifying them. If the corresponding MAC address does not exist, 
you will become unable to access the network.

 

The following is the procedure for confirming that the network connections are 
properly set.

➞ 

Pressing [Start] after entering the desired IP address existing on the network 
displays the result of the PING command on the touch panel display.

If this result is inappropriate, check the settings described in "Interface Settings," 
on p. 2-9, and "TCP/IP Settings," on p. 3-3.

IMPORTANT

 

•

If you set the startup time of the machine's network function by following the 
procedure in "Startup Time Settings," on p. 3-30, execute the PING command only 
after the time set as the startup time passes.

•

If you connect the machine to a switching hub, the machine may not be able to 
connect to a network even though your network settings are appropriate. This 
problem may be resolved by delaying the startup of network communications for 
the machine. See "Startup Time Settings," on p. 3-30 for information on how to set 
up the startup time.