Cannon 3035 User Manual

Protocol Settings

Usin

g a 

TCP/IP Netw

or

k

➞ check 

After pressing [NTP Server Check], if <OK> is displayed, time synchronization is 
working correctly via SNTP.

If <Error> is displayed, check the settings for [NTP Server Address] set in step 5 
of "TCP/IP Settings," on p. 3-3.

Even if you perform [NTP Server Check], time settings are not updated. Check 
that communications are possible between the machine and the NTP server.

 

The key pair and server certificate are required for performing SSL encrypted 
communication, for use with the following items. This section describes how to 
specify the key pair and server certificate settings from the control panel of the 
machine.

•

[IPP Print Settings] (See step 8 of "TCP/IP Settings," on p. 3-3.)

•

[E-Mail/I-Fax] (See "E-Mail/I-Fax Settings," on p. 3-27.)

•

[Remote UI] (See the Remote UI Guide.)

•

MEAP functions via a web browser (See the MEAP SMS Administrator Guide.)

•

[Device Information Delivery Settings] (See the Reference Guide.)

It is necessary to generate and register a key pair in order to use encrypted SSL 
communication for IPP printing, e-mail and I-faxes, the Remote UI, MEAP functions 
via a web browser, and delivering device information.
A key pair and server certificate are preinstalled in the machine. You can also use 
this key pair and server certificate to enable encrypted SSL communication.
The procedure for generating and registering a key pair and self-signed server 
certificate using the control panel of the machine is as follows:

IMPORTANT

 

Up to two key pairs can be registered.