Cannon 3035 User Manual

Setting Up a Computer for Printing/Sending a Fax

Usin

g a 

TCP/IP Netw

or

k

 

■ Installing a New Driver

Install the driver according to the following procedures indicated in the manual 
for each driver:

•

If you want to use the PCL printer driver 
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the 

PCL Driver Guide

.

•

If you want to use the PS printer driver 
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the 

PS Driver Guide

.

•

If you want to use the fax driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the 

Fax Driver Guide

.

IMPORTANT

 

If your computer fails to transmit data to the printer during the driver installation, 
when the error message appears, click [No] 

➞ set the byte count mode to off.

NOTE

 

•

The print application will be LPD and the print queue will be set to <LP> if the driver 
has been installed according to the above procedures.

•

This machine enables you to specify print queues other than <LP>. For details on 
print queues and instructions on how to change the settings, see "Changing the 
Port after Installing the Driver," on p. 3-33.

■ Changing the Port after Installing the Driver

For instructions on how to install Canon LPR2 and set ports, see Chapter 1, 
"Using Canon LPR2," in the 

Canon LPR2 User's Guide

 (PDF manual). For 

instructions on how to display the 

Canon LPR2 User's Guide

, see the 

Network 

Quick Start Guide

.