Panasonic PT-LB30NTE User Manual

B The signal format (“TV-SYSTEM”) may not be set

correctly.

B There may be a problem with the video tape or

other signal source.

B A signal which is not compatible with the projector

may be being input.

B The cable may be too long.
B The external video output for the laptop computer

may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)

B If an RGB INPUT indicator is turned off, the video

signals may not be output from the computer.

B “RGB2 SELECT” in the “OPTION” menu is set to

“OUTPUT” when the signals are input to RGB2
IN/1 OUT connector.

40 

–

62 

–
–

16

46

Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount
of neutral detergent in it, squeeze the cloth very well, and then wipe the
cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a
chemically-treated cloth, read the instructions supplied with the cloth before
use.
Do not wipe the lens with a cloth that is dusty or which produces lint.
If any dust or lint gets onto the lens, such dust or lint will be magnified and
projected onto the screen. Use a blower to clean any dust and lint from the
lens surface, or use a soft cloth to wipe off any dust or lint.