Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DW10000E
  5. User Manual

Panasonic PT-DW10000E User Manual

Download
Page of 122
4 
– ENGLISH
Projection
Power indicator lamp
This shows the power supply status. Make sure 
that you fully understand the operation of the power 
indicator lamp before operating the projector.
Attention
While the projector is in standby preparation mode 
(when the power indicator lamp is lit orange), the 
internal fan is running to cool down the projector. Do 
not turn off the MAIN POWER switch or disconnect 
the power cord at this time.
Note
If the POWER ON “ | ” button is pressed while the 
projector is still in standby preparation mode, it may 
take some time before the projector is ready to 
project pictures.
The cooling fan will still be operating and the 
projector will still be drawing approximately 25 W of 
power while the projector is in standby mode (when 
the power indicator lamp is lit red).
•
•
•
Indicator 
status
Projector status
Off
Main power is off
Red
Lit
Standby mode
POWER ON (|) button can be pressed 
so that images can be projected.
Green
Lit
Images are being projected (on)
Orange
Lit
Standby preparation mode
After a short while, the projector will 
switch to standby mode.
Indicator 
status
Projector status
Off
Main power is off
Red
Lit
Standby mode
POWER ON (|) button can be pressed 
so that images can be projected.
Green
Lit
Images are being projected (on)
Orange
Lit
Standby preparation mode
After a short while, the projector will 
switch to standby mode.
Connecting the power 
cord
Insert the accessory power cord securely into the 
projector and the electrical outlet.
Be sure to read the “IMPORTANT SAFETY NOTICE”  
(pp. 4-5) and “Precautions with regard to safety”  
(pp. 6-9) for details on handling the power cord. 
Installation
1.  Check the shape of the AC 
IN terminal on the side of the 
projector and the shape of the 
power cord connector, and 
insert the power cord securely 
into the AC IN terminal. 
.  Insert the power cord plug into 
an electrical outlet. 
Removal
1.  Check that the MAIN POWER 
switch on the projector is at 
the OFF position, and then 
disconnect the power cord plug 
from the electrical outlet. 
.  Disconnect the power cord 
connector from the AC IN 
terminal of the projector.
Attention
Connect all peripheral equipment to the projector 
before connecting the projector’s power cord. 
(pp. 25-26)
■
■
•
FILTER
CLEANING
OPEN
CLOSE
FILTER
CLEANING
OPEN
CLOSE
Power indicator lamp