Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DW10000E
  5. User Manual

Panasonic PT-DW10000E User Manual

Download
Page of 122
Special Features
ENGLISH – 
81
Note
The air filter cleaning monitor (FILTER CLEANING) 
will flash blue while cleaning of the air filter is in 
progress. If there is a problem with the air filter, the 
air filter cleaning monitor (FILTER CLEANING) will 
light red.
The time taken for cleaning is approximately 30 to 
40 seconds.
The setting time will be the local time. (p. 81)
Automatic cleaning will not be carried out if the 
projector is in standby mode.
If the projector is not in projection mode when the 
setting time is reached, automatic cleaning will not 
be carried out.
Automatic cleaning will not be carried out if 24 
hours have not yet elapsed since cleaning was last 
carried out (either by automatic cleaning or forced 
cleaning).
Example: If the setting time is 7:00 and forced 
cleaning is carried out at 9:00, then 
automatic cleaning will not be carried out at 
7:00 on the following day.
If the time is set to a time which is within 24 
hours from the last time cleaning was carried out, 
automatic cleaning will not be carried out the next 
time the setting time is reached. Instead, cleaning 
will be carried out when the setting time is reached 
on the following day.
Example: If cleaning was carried out at 10:00, and 
the cleaning time setting is then changed to 
20:00, automatic cleaning will be carried out 
at 20:00 on the following day.
When projection starts (when the power is 
turned on), automatic cleaning will be carried out 
immediately if more than 24 hours have elapsed 
since cleaning was last carried out.
•
•
•
•
•
•
•
•
Automatic 
cleaning
Forced 
cleaning
(No cleaning)
Automatic 
cleaning
Setting time
Setting time
Setting time
22 hours elapsed
46 hours elapsed
Automatic 
cleaning
Forced 
cleaning
(No cleaning)
Automatic 
cleaning
Setting time
Setting time
Setting time
22 hours elapsed
46 hours elapsed
Automatic 
cleaning
Automatic 
cleaning
(No cleaning)
Setting time
Setting time
Setting time
10 hours elapsed
34 hours elapsed
Time reset
Automatic 
cleaning
Automatic 
cleaning
(No cleaning)
Setting time
Setting time
Setting time
10 hours elapsed
34 hours elapsed
Time reset
Setting the date and time
This lets you set the time zone and the current date 
and time for the projector’s internal clock.
1.  Press ▲▼ to select “DATE AND
TIME”.
.  Press ENTER.
The “DATE AND TIME” screen will be 
displayed.
.  Press ▲▼ to select “TIME ZONE”.
4.  Press ◄► to switch “TIME ZONE”.
5.  Press ▲▼ to select “ADJUST
CLOCK”.
6.  Press ENTER.
The “ADJUST CLOCK” screen will be 
displayed.
7.  Press ▲▼ to select the item to 
be set, and use ◄► to set the 
local time. 
8.  Use ▲▼ to select “APPLY”, and 
then press ENTER. 
This completes setting of the time. 
•
•
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
    
MENU SELECT
    
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
    
MENU SELECT
    
SUB MENU
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
DATE AND TIME
TIME ZONE
ADJUST CLOCK
LOCAL DATE
LOCAL TIME
   
MENU SELECT
   
CHANGE
09:00
2007/01/01
12:34:56
DATE AND TIME
TIME ZONE
ADJUST CLOCK
LOCAL DATE
LOCAL TIME
   
MENU SELECT
   
CHANGE
09:00
2007/01/01
12:34:56
ADJUST CLOCK
YEAR
MONTH
DAY
HOUR
MINUTE
APPLY
   
MENU SELECT
   
CHANGE
2007
1
1
12
34
ADJUST CLOCK
YEAR
MONTH
DAY
HOUR
MINUTE
APPLY
   
MENU SELECT
   
CHANGE
2007
1
1
12
34