Panasonic PT-LB80NTU User Manual

You can operate the projector with the remote control 
within the remote range 15 m (49'2"), approximately 
± 30° vertically and horizontally.

Q

Make sure the remote control emitter is facing to 
the remote control signal receptor of the projector 
when pressing the buttons to operate.

Q

Make sure the remote control emitter is facing to 
the screen when pressing the buttons to operate 
the projector. The signal will be reflected off the 
screen to the projector.

 

The operating range may differ due to the screen 
material, and this function may not be effective with a 
translucent screen.

If you need to readjust the projected image 
position while projecting or when AUTO SETUP 
in OPTION menu is set to BUTTON, press the 
AUTO SETUP button.

The projector will detect a RGB signal by SIGNAL 
SEARCH system and adjust the setting of POSITION, 
DOT CLOCK and CLOCK PHASE in POSITION menu 
automatically.

• See “About Your Projector” on page 12 to confirm the 

position of the remote control signal emitter and 
receptor.

• Do not let strong light shine onto the signal receptor. 

The remote control may malfunction under strong light 
such as fluorescent.

• If there are any obstacles between the remote control 

emitter and the remote control signal receptor, the 
remote control may not operate correctly.

• If SIGNAL SEARCH setting in OPTION menu is set to 

OFF, select the required signal manually first. See 
“Switching the input signal” on page 24.

• If the dot clock frequency is 108 MHz or higher, AUTO 

SETUP is not effective.

• If the projected image is too dark or blurred around the 

edge, AUTO SETUP may stop the processing before 
complete the adjustment and return to the previous 
setting. Project a much clearer or lighter image and try 
again.

Screen

Projected image