Panasonic PT-LB80NTU User Manual

You can switch the input method manually by 
pressing the COMPUTER, WIRELESS 
(PT-LB80NTU/PT-LB75NTU only) and 
VIDEO buttons. Press the required button 
several times or I H to cycle through the 
input methods as follows.

 

You can confirm the selected input method in displayed 
graphical input guide on the upper right of the screen. 
Highlighted in yellow is selected terminal. See “INPUT 
GUIDE” on page 34.

Q

Q

 

The WIRELESS button is only for PT-LB80NTU/
PT-LB75NTU.

 

See CD-ROM contents for more detailed information.

Q

Q

Press the FREEZE button to capture the image 
and you can see it as a still picture. While the 
image is frozen, the audio sound through the 

projector will stop. Press the FREEZE button again to 
escape and return to the continuing image.

You can stop the projection and audio sound 
through the projector temporarily for saving 

electrical power. Press the AV MUTE button again to 
escape.

You can reset most of the customized settings 
to the factory defaults by pressing the 
DEFAULT button of the remote control. Display 

the required sub menu or the menu items and press the 
DEFAULT button again.

 

• Only when the COMPUTER2 SELECT is set to INPUT, 

you can switch between COMPUTER1 and 
COMPUTER2.

• With no signals from COMPUTER terminals, the 

computer connecting guidance will be displayed. See 
“Computer connection guidance” on page 46.

*1

*1. WIRELESS is only for PT-LB80NTU/PT-LB75NTU.

• Switched signal may be displayed after a short interval.
• If you select an unplugged input method, the input guidance will blink on and off several times.
• See “List of compatible signals” on page 44.
• See “Connections” on page 17.

• Some menu items are not available to reset by pressing 

the DEFAULT button. Adjust each menu items 
manually.

• To reset all the settings to the factory defaults, see