Panasonic PT-D6000 User Manual
Settings
PROJECTOR SETUP menu
E
NGLISH - 30
You can see the status of the projector about the following
items.
items.
* Not available for PT-D5000.
After you replaced the Auto Cleaning Filter (ACF),
REMAINING FILTER of STATUS need to be reset to "0".
REMAINING FILTER of STATUS need to be reset to "0".
1. Press the ENTER button.
2. Select OK by pressing I, then press the ENTER button.
3. The REMAINING FILTER of STATUS will be reset to
2. Select OK by pressing I, then press the ENTER button.
3. The REMAINING FILTER of STATUS will be reset to
“0”.
Display the STATUS and confirm the figure.
You can set the timer to switch off the power of the projector
after a certain period of time automatically when no signal is
detected. Press I H to select the required period from 10 to
90 minutes at intervals of 10 minutes.
after a certain period of time automatically when no signal is
detected. Press I H to select the required period from 10 to
90 minutes at intervals of 10 minutes.
You can assign a certain menu function to the FUNCTION
button as shortcut. Press I H to select the required menu
option, and the ENTER button.
button as shortcut. Press I H to select the required menu
option, and the ENTER button.
STATUS
Items
Description
INPUT
Displays the input selection state.
NAME
Displays the input signal name.
SIGNAL FREQUENCY
Displays the frequency of the input
signal.
signal.
PROJECTOR RUNTIME
Displays the projector runtime.
LAMP1
Displays the lighting time of LAMP1.
LAMP2
Displays the lighting time of LAMP2.
INTAKE AIR TEMP.
Displays the intake air temperature of
the projector.
the projector.
OPTICS MODULE TEMP.
Displays the temperature inside the
projector.
projector.
AROUND LAMP TEMP.
Displays the temperature around the
lamp of the projector.
lamp of the projector.
REMAINING FILTER
Displays the filter runtime.
QUANTITY
Displays the filter remaining quantity.
PROJECTOR TYPE
Displays type of projector.
SERIAL NUMBER
Displays the serial number of the
projector.
projector.
MAIN VERSION
Displays the main version of the
firmware of the projector unit.
firmware of the projector unit.
SUB VERSION
Displays the sub version of the
firmware of the projector unit.
firmware of the projector unit.
NETWORK VERSION
Displays the network version of the
projector unit.
projector unit.
ON COUNT
POWER ON TIMES
Displays the number of times the
power has been tuned on.
power has been tuned on.
LAMP1 ON
Displays the number of times LAMP1
has been lit.
has been lit.
LAMP2 ON
Displays the number of times LAMP2
has been lit.
has been lit.
SHUTTER
Displays the number of times the
shutter function has been used.
shutter function has been used.
LAMP1 LOW *
Displays the LAMP1 lighting time with
LOW setting in LAMP POWER.
LOW setting in LAMP POWER.
HIGH *
Displays the LAMP1 lighting time with
HIGH setting in LAMP POWER.
HIGH setting in LAMP POWER.
LAMP2 LOW *
Displays the LAMP2 lighting time with
LOW setting in LAMP POWER.
LOW setting in LAMP POWER.
HIGH *
Displays the LAMP2 lighting time with
HIGH setting in LAMP POWER.
HIGH setting in LAMP POWER.
NUMBER OF ENTRY
SIGNAL
SIGNAL
Displays the number of registered
signals.
signals.
REMOTE2 STATUS
Displays REMOTE 2 IN control status.
FILTER COUNTER RESET
NOTE:
• See “Replacing the Auto Cleaning Filter (ACF)” in the
operating instructions booklet that is provided with the
projector.
projector.
NO SIGNAL SHUT-OFF
DISABLE
FG
FG
10 MIN.
90 MIN.
FG
FG
20 MIN.
80 MIN.
FG
FG
30 MIN.
70 MIN.
FG
FG
40 MIN.
60 MIN.
FG
FG
50 MIN.
FUNCTION BUTTON
Options
Functions
Refer
DISABLE
Deactivate the FUNCTION
button.
button.
-
SUB MEMORY LIST
Displays the assigned SUB
MEMORY LIST.
MEMORY LIST.
SYSTEM SELECTOR
Switches SYSTEM SELECTOR
options.
options.
SYSTEM DAYLIGHT
VIEW
VIEW
Switches the SYSTEM
DAYLIGHT VIEW setting.
DAYLIGHT VIEW setting.
FREEZE
Freezes the image.
SIDE BY SIDE
Start the SIDE BY SIDE mode.