Panasonic PT-FW300NTE User Manual

You can switch the input method manually by 
pressing the COMPUTER, NETWORK and 
VIDEO buttons. Press the required button 
several times or I H to cycle through the 
input methods as follows. The actual 
projected image will be changed in a while.

 

The graphical guidance will be displayed on the upper 
right of the projected image and you can confirm the 
selected input method which is highlighted in yellow. See 
“INPUT GUIDE” on page 40.

J

J

 

Only for the network connection operation. See CD-
ROM contents for more detailed information.

J

J

You can enlarge the projected image down to a centred area for emphasizing within the range of 1x to 2x.

Q

1. Press the DIGITAL ZOOM +/- button once.

 

The centred area of the image will then be enlarged 
to 1.5x.

2. Adjust the image size by pressing the DIGITAL 

ZOOM +/- button.

 

The image size will be changed in steps of 0.1.

Q

Press F G I H to shift the centre point.

• If you select an unplugged input method, the guidance 

will blink on and off several times.

• See “List of compatible signals” on page 54.
• See “Connections” on page 21.

H

F

G

• Only when the COMPUTER2 SELECT is set to INPUT, 

the COMPUTER2 is selectable.

IH

H

F

G

F

G

I

• When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK 

in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 39.

• When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.
• While DIGITAL ZOOM is activated, FREEZE is not available.