Panasonic PT-FW300NTE User Manual

Q

 

 

Output audio that is input to the 
COMPUTER AUDIO 2.

 

Output audio that is input to the 
AUDIO IN.

You can use the 7 different test patterns to adjust the 
focus of the image. See “Lens shift and positioning” on 
page 19.

1. Press the ENTER button to display the test pattern 

1.

2. Press I H to select the required test pattern.
3. Adjust the focus with the focus lever.
4. Press the MENU or RETURN button to return to 

the previous menu, or press repeatedly to escape 
from the menu mode.

You can reset all of the customised settings to the factory 
defaults except NETWORK, RUNTIME and 
REMAINING FILTER of STATUS in PROJECTOR 
SETUP menu.

1. Press the ENTER button.
2. Select OK by pressing I, then press the ENTER 

button.

3. Turn off the power by pressing the power button.
4. Switch off the MAIN POWER button to reset the 

projector.

5. Switch on the MAIN POWER button.
6. Press the power button.
7. The minimum required setting screen will be 

displayed.

 

After you replaced the Auto Cleaning Filter (ACF), 
REMAINING FILTER of STATUS in PROJECTOR 
SETUP need to be reset to "0".

1. Press the ENTER button for more than 3 seconds.

 

The confirmation screen will be displayed.

2. Select OK by pressing I, then press the ENTER 

button.

3. Display the STATUS and confirm the figure.

• When the projector and/or the screen is tilted, adjust 

the focus at the centre of the image. The upper and 
lower edge might be out of focus.

• When the image is distorted in keystone, adjust the 

KEYSTONE in POSITION menu.

• The security system is deactivated by default and when 

initialised.

• When the projector is initialised, it will be reset to the 

factory default password operation.