Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. TQBJ0349
  5. User Manual

Panasonic TQBJ0349 User Manual

Download
Page of 95
ADVANCED MENU
ENGLISH - 
51
Settings
INPUT RESOLUTION
Input resolution adjustment achieves the best image 
when the screen flickers or halo is observed around 
the contour. Set the values appropriately for the signal 
resolution that is being used.
Press ▲▼ to select [INPUT 
1 ) 
RESOLUTION].
Press <ENTER> button.
2 ) 
The [INPUT RESOLUTION] screen will be 
 
z
displayed.
Press ▲▼ to select [TOTAL DOTS], 
3 ) 
[DISPLAY DOTS], [TOTAL LINES] or 
[DISPLAY LINES], and the press ◄► 
to adjust it.
Each item automatically displays a value in 
 
z
response to the type of the input signal. If 
vertical stripes appear on the screen or the 
image is partly missing, increase or decrease 
the displayed value while observing the screen 
to achieve the optimal value.
Note
The vertical stripes will not appear on the all white signal 
 
z
image.
The picture may be distorted during the adjusting 
 
z
operation, but this is not a fault.
The [INPUT RESOLUTION] can be adjusted only when 
 
z
RGB signal input is applied with RGB1 and RGB2 IN.
CLAMP POSITION
Use the clamp position adjustment to achieve the 
optimal value when dark areas of the image are 
crushed or displayed in green.
Press ▲▼ to select [CLAMP 
1 ) 
POSITION].
Press ◄► to adjust.
2 ) 
The value changes from 1 to 255.
 
z
The optimal value for the clamp position 
 
z
adjustment
If dark areas are crushed :
The optimal value is the point where the dark 
area is best improved.
If the dark areas are displayed in green : 
The optimal value is the point where the green 
areas become black and the crushing effect is 
rectified.
Note
The [CLAMP POSITION] can be adjusted only when the 
 
z
RGB signal input is applied with RGB1 and RGB2 IN.
The [CLAMP POSITION] may not be adjusted, depending 
 
z
on the signal.
FRAME RESPONSE
When 1 080/60i, 1 080/50i or 1 080/24sF signals are 
entered, the video processing is simplified and the 
frame delay of image is reduced.
Press ▲▼to select [FRAME 
1 ) 
RESPONSE].
Press ◄► to switch [FRAME 
2 ) 
RESPONSE] setting.
The setting will change as follows each time the 
 
z
button is pressed.
NORMAL
FAST
NORMAL
Precedes the image quality.
FAST
Suppresses a time delay.
Note
Select the [NORMAL] mode to display a high-
 
z
quality image.
If [NOISE REDUCTION] is set to [1], [2] or [3], the 
 
z
[FRAME RESPONSE] function is suppressed.
RASTER POSITION
When the scaler is set such that the image is smaller 
than the display area, the image can be moved to any 
position inside the display area.
Press ▲▼ to select [RASTER 
1 ) 
POSITION].
Press <ENTER> button.
2 ) 
The [RASTER POSITION] screen will be 
 
z
displayed.
Press ▲▼◄► to adjust the position.
3 )