Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. TQBJ0349
  5. User Manual

Panasonic TQBJ0349 User Manual

Download
Page of 95
ENGLISH - 
53
Settings
See 
 
z
(
Æ
page 39).
See 
 
z
(
Æ
page 40).
COLOR MATCHING
When multiple sets are used simultaneously, this 
projector allows the user to correct the difference of 
colors among the sets.
Press ▲▼ to select [COLOR 
1 ) 
MATCHING].
Press ◄► to switch [COLOR 
2 ) 
MATCHING].
The setting will change as follows each time 
 
z
◄► is pressed.
OFF
3COLORS
MEASURED
7COLORS
OFF
Color matching adjustment is not 
carried out.
3COLORS
It is possible to adjust the 3colors of 
[RED], [GREEN] and [BLUE].
7COLORS
It is possible to adjust the 7colors of 
[RED], [GREEN], [BLUE], [CYAN], 
[MAGENTA], [YELLOW] and 
[WHITE].
MEASURED
Refer to “ 
■
 Adjusting the color 
matching using a colorimeter” (
Æ
 on 
this page) for details on this mode.
 
J
If [3COLORS] or [7COLORS] was 
selected in step 2).
Press <ENTER> button.
3 ) 
The [3COLORS] or [7COLORS] screen will be 
 
z
displayed.
Press ▲▼ to select [RED], [GREEN] 
4 ) 
and [BLUE] (if [7COLORS] was 
selected, select [RED], [GREEN], 
[BLUE], [CYAN], [MAGENTA], 
[YELLOW], and [WHITE]).
Press <ENTER> button.
5 ) 
The [3COLORS:RED], [3COLORS:GREEN] or 
 
z
[3COLORS:BLUE] screen will be displayed.
If you selected [7COLORS], the 
[7COLORS:RED], [7COLORS:GREEN], 
[7COLORS:BLUE], [7COLORS:CYAN], 
[7COLORS:MAGENTA], [7COLORS:YELLOW], 
or [7COLORS:WHITE] screen will be displayed.
If [AUTO TEST PATTERN] is turned [ON], the 
 
z
test pattern of the selected color is displayed.
Press ◄► to adjust the values.
6 ) 
These values can be adjusted from 0 (off) to 
 
z
2 048 (full gain).
Note
The effects of correcting the adjustment color:
 
z
When tuning the correction color that is the same as the 
adjustment color: the brightness of the adjustment color 
changes.
RED : RED is added to or reduced from the adjustment 
color.
GREEN : GREEN is added to or reduced from the 
adjustment color.
BLUE : BLUE is added to or reduced from the adjustment 
color.
This adjustment should be carried out by a person who is 
 
z
familiar with the projector or by a service person because 
a high level of skill is required to make successful 
adjustment.
Pressing <DEFAULT> button will restore the factory 
 
z
defaults for all items.
When any setting other than [OFF] has been selected 
 
z
for [COLOR MATCHING], the [COLOR TEMPERATURE] 
setting is fixed at [USER1].
 
J
Adjusting the color matching 
using a colorimeter
The [RED], [GREEN], [BLUE], [CYAN], 
[MAGENTA], [YELLOW] and [WHITE] colors 
can be changed to the desired hues using a 
colorimeter which is capable of measuring the 
chromaticity coordinates and luminance.
Inputting the current luminance and 
 
Q
chromaticity coordinates
Press ▲▼ to select [COLOR 
1 ) 
MATCHING].
Press ◄► to select [709MODE] or 
2 ) 
[MEASURED].
Press <ENTER> button.
3 ) 
The [
 
z
MEASURED MODE] screen will be 
displayed.
Press ▲▼ to select [MEASURED 
4 ) 
DATA].
Press <ENTER> button.
5 ) 
The [MEASURED DATA] screen will be 
 
z
displayed.
DISPLAY OPTION menu