Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. TQBJ0349
  5. User Manual

Panasonic TQBJ0349 User Manual

Download
Page of 95
DISPLAY OPTION menu
ENGLISH - 
55
Settings
WAVEFORM MONITOR  
(PT-DZ570U only)
This function displays the waveform of the input signal 
from a connected peripheral device.
You can check if the image output (BRIGHTNESS) 
signal level is within the range recommended by this 
projector and adjust it as necessary.
Press ▲▼ to select [WAVEFORM 
1 ) 
MONITOR].
Press ◄► to switch [WAVEFORM 
2 ) 
MONITOR].
The setting will change as follows each time 
 
z
◄► is pressed.
OFF
ON
Press the <MENU> button twice to turn 
3 ) 
off the menu screen.
Select any horizontal line with the ▲▼.
4 ) 
Line selection  
(BRIGHTNRSS)
Line selection  
(RED)
Line selection  
(BLUE)
Line selection  
(GREEN)
Note
Setting can also be performed using the <FUNCTION> 
 
z
button. (
Æ
page 66)
 
J
Adjust the waveform
Project the brightness adjustment signal from, for 
example, a commercially available adjustment disc 
(0% [0 IRE or 7.5 IRE] - 100 % [100 IRE]) and adjust 
the waveform.
Adjusting brightness
 
Q
Select [Line selection (BRIGHTNRSS)] 
1 ) 
in the waveform monitor.
Adjust the black level.
2 ) 
In [BRIGHTNESS] of on-screen menu 
 
z
[PICTURE], adjust the 0 % of the black level of 
the image signal to the position corresponding 
to 0% on the waveform monitor.
Adjust the white level.
3 ) 
In [CONTRAST] of on-screen menu [PICTURE], 
 
z
adjust the 100 % of the while level of the image 
signal to the position corresponding to 100 % 
on the waveform monitor.
Adjusting RED, GREEN, and BLUE
 
Q
Set [COLOR TEMPERATURE] to 
1 ) 
[USER1] or [USER2]. (
Æ
page 43)
Select [Line selection (RED)] in the 
2 ) 
waveform monitor.
Adjust the dark portion of RED.
3 ) 
In [RED] of [WHITE BALANCE LOW], adjust 
 
z
the 0 % of the black level of the image signal 
to the position corresponding to 0 % on the 
waveform monitor. (
Æ
page 43)
Adjust the light portion of RED.
4 ) 
In [RED] of [WHITE BALANCE HIGH], adjust 
 
z
the 100 % of the white level of the image signal 
to the position corresponding to 100 % on the 
waveform monitor. (
Æ
page 43)
Adjust [GREEN] and [BLUE] in a 
5 ) 
similar manner.
Note
When the DVI-D signal, HDMI signal, or SDI signal is 
 
z
inputted, check that the [DVI SIGNAL LEVEL], [HDMI 
SIGNAL LEVEL], and [SDI SIGNAL LEVEL] are correctly 
set before adjusting the black level.
The keystone cannot be applied to the waveform monitor 
 
z
display.
The waveform monitor is not displayed while the on-
 
z
screen display is off.
AUTO SIGNAL
You can turn ON/OFF automatically detecting system 
of the AUTO SETUP feature.
Press ▲▼ to select [AUTO SIGNAL].
1 ) 
Press ◄► to switch [AUTO SIGNAL].
2 ) 
The setting will change as follows each time 
 
z
◄► is pressed.
OFF
ON
OFF
Only when <AUTO SETUP> button 
is pressed, the projected image 
position will be adjusted.
ON
If unregistered signals are input 
when [ON] is selected, auto setup 
will be initiated automatically.
Image 
displayable 
area
Monitor position
0%
50%
100%
Signal level