Panasonic pt-ae900e User Manual

(PC only)
“H-POSITION”, “V-POSITION”,
“DOT CLOCK” and “CLOCK
PHASE” are automatically adjusted
according to the input signal.

# Press the MENU button to display the menu screen.

$ Select the “LANGUAGE” menu from the main menu, and then press

% Press the F

F or G

G button to select a language, and then press the

NOTE:
B When the “ASPECT” is set to

“V SCROLL” (page 30), “AUTO
SETUP” cannot be performed.

ON
The signal name is displayed in the
top-right corner of the screen when
the input signal is changed.

OFF
Use this setting when you do not
want the signal name to be
displayed.

# Press the MENU button to display the menu screen.
$ Select the “OPTION” menu from the main menu, and then press the

% Press the F or G button to select an item.
& Press the I or H button to change the setting.

You can select the background for
the OSD from 3 types.
TYPE1
Transparent black
TYPE2
Solid blue
TYPE3
Transparent navy blue

You can select the position where
the OSD is displayed.

This should normally be set to “ON”.
ON
When the power is turned on, the
projector detects which signal is
being input, and uses that signal for
projection.
OFF
Use this setting when you do not
want the signal source to be
changed automatically when the
power is turned on.

NOTE:
B The setting for “TV-SYSTEM”

will also be displayed when an
S-VIDEO/VIDEO signal is being
input.

keystone correction required is
as minimal as possible.

B The picture size will also change

when correction of keystone
distortion is carried out.

B The ratio of length and width of

an image may become incorrect
depending on the amount of the
keystone correction.

B Keystone distortion of the on-

screen display will not be
corrected.

B Keystone distortion may remain

depending on the lens shift
adjustment.

Indicates the language which
is currently set