Panasonic PT-AX200E User Manual

You can operate the projector with the remote control 
within the remote range 7 m (22'11").

Q

Ensure the remote control emitter is facing to the 
remote control signal receptor on front/back of the 
projector and press the required buttons to 
operate.

Q

Ensure the remote control emitter is facing to the 
screen and press the required buttons to operate 
the projector. The signal will be reflected off the 
screen. The operating range may differ due to the 
screen material. This function may not be effective 
with a translucent screen.

In a dark room, you can turn on the button 
backlight to operate the remote control. 
Press the LIGHT button on the upper right 
corner of the unit to turn on the backlight and 

enter the light-on mode. 

After 5 seconds without any operation, the backlight will 
be faded, and it will go out after another 5 seconds. 
Press any but the LIGHT button to turn on again. To 
escape from the light-on mode, press the LIGHT button.

You can switch the preset settings by pressing the THEATER ROOM, LIVING ROOM, FAVORITE LOAD buttons. 
See “FAVOURITE LOAD” on page 32.

Disp

lay the 

FAVOURITE LOAD menu. See 

• Do not let strong light shine onto the signal receptor. 

The remote control may malfunction under strong light 
such as fluorescent.

• If there are any obstacles between the remote control 

and the remote control signal receptor, the remote 
control may not operate correctly.

Recommended for viewing in dark room.

Recommended for viewing in lit room.