Panasonic PT-EX12KU User Manual

z

Refer to the following table and use an appropriate 

light-shielding plate.

Light-shielding plate-1

(T0CRS0008--1)

ET-ELW03

*1

Light-shielding plate-2

(T0CRM0014--1)

ET-ELW04, 

ET-ELW06, 

ET-ELS02, 

ET-ELS03, 

ET-ELT03

 is inscribed

Light-shielding plate-3

(T0CRM0013--1)

ET-ELW02, 

ET-ELW03

*1

, 

ET-ELT02, 

ET-ELM01

 is inscribed

*1:  Use the light-shielding plate-1 and light-shielding plate-3 

together.

■

z

The light-shielding plate-2 and light-shielding 

plate-3 should be separated to the upper and lower 

plates.

Upper plate

Lower plate

■

z

Make sure that the shape of the light-shielding plate 

matches the lens.

■

z

Make sure that the attaching direction of the light-

shielding plate is correct and set them properly.

(i)  Hold the lens lock lever and slide it upward to 

release the lock, and then insert the lens with 

the lens attachment into the projector body.

(ii)  Hold the lens lock lever and slide it downward 

until the lever clicks to secure the lens.

•■When attaching the motor driven lens, be 

sure to move the motor to the right side to 

attach the lens.

•■After attaching the lens, make sure that the 

lens is not loose and is properly attached.

■

z

For details, refer to “Adjusting the focus” 

(



 page 30).

■

z

If the focus adjustment is not necessary, go to 

Step 

10).