Panasonic PT-EX12KU User Manual

■

z

Aligning the point position of the lens hood 

with the end (on the left) of the caution label 

attached to the projector body, turn the lens 

hood while pushing it until it clicks to overlap 

with the point position of the projector body.

■

z

Confirm that the lens hood is attached completely. 

If not attached completely, the lens may fall off, 

causing damage.

■

z

Turn on the projector. Operate the lens shift, 

zoom, and focus fully to check that the light-

shielding plate is moved with the lens properly. 

If the light-shielding plate interferes with lens 

operations, set the light-shielding plate again.

■

z

Do not operate the projector with the light-shielding 

plate removed. Doing so may result in malfunction 

of the projector.

■

■Notes on attaching ET-ELW03

When attaching ET-ELW03, use two types of light-

shielding plates.

Follow the procedure on “Attaching the lens” 

(



 page 26) to set the light-shielding plate-3, and 

then follow the procedure below to set the light-

shielding plate-1.

■

z

Set the light-shielding plate with the <THIS SIDE 

BACK> side down.

■

z

Set the light-shielding plates with the convex 

side of the light-shielding plate-1 down.

Light-shielding plate-3

Light-shielding plate-1

(In front of the light-shielding plate-3)