Panasonic PT-EX12KU User Manual

■

z

Read carefully the instruction manual of the device you intend to connect.

■

z

Turn off the power switch of the device before connecting the cable.

■

z

If a connection cable is not supplied with the device and the optional cable is not available, prepare a 

connection cable to suit the device.

■

z

Video signals containing too much jitter may cause the images on the screen to randomly wobble. In this case, 

a time base corrector (TBC) must be connected.

■

z

The projector accepts the following signals: video signals, S-video signals, analog RGB signals (synchronous 

signals are TTL level), and digital signals.

■

z

Some computer models are not compatible with the projector.

■

z

When connecting a device to the projector using a long cable, it may not be possible to achieve a normal 

picture without a compensator.

■

z

For details of the video signals supported by the projector, refer to “List of compatible signals” (



 page 111).

■

z

Use an HDMI High Speed cable that adheres to the HDMI standard. Use of a cable that does not adhere to the  

standard may result in abnormal operation such as cut-out of the image, failure to project, etc.

■

z

The <HDMI IN> terminal can be connected with an external device with a DVI terminal using an HDMI/DVI 

conversion cable. With some devices, however, normal operation  may not be possible and images may not 

appear. (



 page 76)

■

z

When the <DIGITAL IN> terminal is used, normal operation may not be possible with some devices and images 

may not appear.

■

z

The <DIGITAL IN> terminal (in the digital signal input mode) is compatible only with single link signals.

■

z

For details of RGB signals from computers that the projector supports, refer to “List of compatible signals” 

(



 page 111).

■

z

If you operate the projector using the computer with the resume feature (last memory), it may be required to 

reset the resume feature.

■

z

The <DIGITAL IN> terminal (in the digital signal input mode) may require the EDID setting depending on the 

connected device.

■

z

To connect the projector with a computer over a wired LAN, refer to the “Operating Instructions – Network 

Operations” on the supplied CD-ROM.