Panasonic PT-EX12KU User Manual

■

z

Always use one of the following when connecting a VCR.

–■A VCR with built-in time base corrector (TBC)

–■A time base corrector (TBC) between the projector and the VCR

■

z

If burst signals are connected to nonstandard signals, the image may be distorted. In such a case, connect a 

time base corrector (TBC) between the projector and the device.

■

z

Use an HDMI High Speed cable that adheres to the HDMI standard. Use of a cable that does not adhere to the  

standard may result in abnormal operation such as cut-out of the image, failure to project, etc.

■

z

The <HDMI IN> terminal can be connected with an external device with a DVI terminal using an HDMI/DVI 

conversion cable. With some devices, however, normal operation  may not be possible and images may not 

appear. (



 page 76)

■

z

The <DIGITAL IN> terminal can be connected to HDMI and DVI-D compatible devices, but normal operation 

may not be possible with some devices and images may not appear.

■

z

The <DIGITAL IN> terminal (in the digital signal input mode) is compatible only with single link signals.