Panasonic PT-EX12KU User Manual

If the image cannot be correctly displayed when an 

external device is connected to the projector using 

HDMI, change the settings.

1)  Press ▲▼ to select [HDMI setup].
2)  Press the <ENTER> button.
3)  Press ▲▼ to switch the setting.

Select when the output from the 

external device is “NORMAL

*1

”.

[Enhanced] Select when the output from the 

external device is “ENHANCED

*1

”.

*1:  The titles of the output settings differ depending on the 

device. For details, refer to the operating instructions of the 

external device.

Sets logo selection and the PIN code for logo 

selection.

1)  Press ▲▼ to select [Logo].
2)  Press the <ENTER> button.

■

z

The sub menu 2 is displayed.

3)  Press ▲▼ to select.

■

■[Logo select]

2)  Press ▲▼ to switch the setting.

■

z

The setting will change as follows each time 

you press the button.

Clears logo from screen.

Displays the image registered by the 

user.

Displays in the factory default 

settings.

*1:  Available when the image is registered.

■

z

“Logo Transfer Software” is required to register 

the image.

■

■[Logo PIN code lock]

Sets the system to make the setting and changing 

of the “logo” only by the administrator.

■

z

The PIN code input screen is displayed.

2)  Press ▲▼◀▶ or the number (<0> - 

3)  Press ▲▼◀▶ to select [Set].
4)  Press the <ENTER> button.

■

z

If the PIN code is accepted, the projector 

returns to the sub menu 2.

5)  Press ▲▼ to switch the setting.

The logo selection can be changed 

without the PIN code.

The PIN code is required to change 

the logo selection.

■

z

The entered PIN code is displayed with * mark on 

the screen.

■

z

The factory default setting for the logo PIN code is 

“4321”.

■

z

To re-enter a number, press ◀▶ to select the digit 

to re-enter, then press ▲▼ or the number (<0> - 

<9>) buttons to re-select the number.

■

z

Move the cursor to [Cancel] and press the 

<ENTER> button to return to the sub menu 2.

■

z

If [Logo PIN code] and the number are displayed in 

red, an error has occurred. Re-enter the number.