Panasonic PT-EX12KU User Manual

1)  Press ▲▼ to select [Power 

■

z

The sub menu 2 is displayed.

3)  Press ▲▼ to select an item, and press 

Cancels power management 

function.

Turns off the lamps and starts cooling 

when the time set using [Timer] has 

elapsed. While lamp is being cooled, 

the standby indicator <STANDBY>, 

and the power indicator <POWER> 

are flashing, you cannot operate the 

projector.

When lamp cooling has finished, the 

power indicator <POWER> continues 

flashing and the standby indicator 

<STANDBY> lights up instead of 

flashing, indicating that the projector 

is now in the power management 

mode.

From this point, if a signal is input 

or operations are performed on the 

projector, the lamps will turn on and 

the projection will start.

Turns off the lamps and starts cooling 

when the time set using [Timer] has 

elapsed. During lamp cooling, you 

cannot operate the projector.

When lamp cooling has finished, the 

power will turn off.

Sets times from 1 - 30 minutes.

■

z

The factory default setting is [Off].

■

z

The power management function cannot be used 

when the freeze function (



 page 47) or shutter 

function (



 page 47) is in use.

■

z

When the power management function is started, 

[P-timer] is reset.

This is a function for automatically switching on 

the power of the projector when the power cord is 

connected, without requiring operations on the power 

<POWER ON> button on the remote control or the 

power 

 button on the control panel.

1)  Press ▲▼ to select [Direct on].
2)  Press the <ENTER> button.
3)  Press ▲▼ to switch the setting.

Enables normal operations to turn 

on/off the power.

Allows power to be turned on 

directly.

■

z

Be sure to turn on/off the power using the correct 

operations.

■

z

Pressing the power <POWER ON> button on the 

remote control or the power 

 button on the 

projector will not turn on the power until the lamp 

cooling has finished and the lamps are ready to be 

turned on again.