Panasonic PT-CW240E User Manual
Maintenance/replacement
ENGLISH -
57
Maintenance
Replacing the unit
Air filters
J
The air filter should be replaced when cleaning is ineffective.
A replacement air filter unit is available separately. (service component)
Contact your dealer for the optional air filters.
Also, please replace the air filters together when replacing the lamp unit.
Air filters (Part Number: Side H518PE28G001, Rear H518PE29G001) are included with the [ET-LAC300 /
ET-LAC200] replacement lamp unit.
Replacement of the air filters
J
Turn off the projector, and unplug the AC power cord from the AC outlet.
1 )
Clean up the dust on the projector and around the air vents.
2 )
Slowly pull out the air filters from rear and side.
3 )
Install the new air filters (Replacement air filters).
4 )
To install the air filters, reverse the previous steps until you hear a "click" sound.
z
Reset the [Filter Reminder].
5 )
Turn on the power and perform [Cleaning up Reminder] in the [Options] menu.
z
(
Æ
page 44)
Attention
Turn off the power before you replace the air filters.
z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even in the
z
event of the air filter unit dropping.
Do not operate the projector with the air filter unit removed. Dust may accumulate on the optical elements degrading picture
z
quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
Air filter (side)
Air filter (rear)