Panasonic PT-LW25HU User Manual

Setting

- ENGLISH

Settings

Logo PIN code change

Logo PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [Logo PIN code

1 )

change].
Press the <SELECT> button.

2 )

Current logo PIN code dialog box appears.

Press ▲▼ to enter the current code.

3 )

The New Logo PIN code input dialog box

appears. Set a new [Logo PIN code], a

confirmation box appears, choose [Yes] to set

the new [Logo PIN code].

Attention

Be sure to note the new [Logo PIN code] and keep it on

hand. If you lost the number, you could no longer change

the Logo PIN code setting.

Terminal

The [COMPUTER IN 2/MONITOR OUT] terminal on

the back of the projector is switchable for computer 2

input or monitor output.

Press ▲▼ to select [Terminal] and

1 )

then press the <SELECT> button .
Press ▲▼ to switch the item.

2 )

Computer 2

Computer input

Monitor out

Monitor out

Attention

[Terminal] function is not available when selecting

[Computer 2] to the input source. Change the input

source to the others (Computer 1 or Video) so that the

[Terminal] function will be available.

Power management

For reducing power consumption as well as

maintaining the lamp life, the [Power management]

function turns off the projection lamp when the

projector is not operated for a certain period.

Press ▲▼ to select [Power

1 )

management].
Press ► or the <SELECT> button to

2 )

access the submenu.

Mode

Press ▲▼ and then press the

1 )

<SELECT> button to select one mode

among the items as below.

Ready When the lamp has been fully cooled

down, the <STANDBY(R)/ON(G)>

indicator changes to green blinking.

In this condition, the projection lamp

will be turned on if the input signal

is reconnected or any button on the

control panel or remote control is

pressed.

Shut

down

When the lamp has been fully cooled

down, the power will be turned off.

Off

[Power management] function is off.

Timer

Press ▲▼ to select [Timer] and then

1 )

press the <SELECT> button.
Press ▲▼ to set the Timer(1~30min).

2 )

Direct on

Press ▲▼ to select [Direct on] and

1 )

then press the <SELECT> button.
Press ▲▼ to switch between [On] and

2 )

[Off ].

When this function is set to [On], the projector

will be automatically turned on just by

connecting the AC power cord to a wall outlet.

Be sure to turn off the projector properly. If the

projector is turned off in the incorrect sequence,

the [Direct On] function does not work properly.

Standby mode

This function can set the electric power when the

projector is standing by.

Press ▲▼ to select [Standby mode]

1 )

and then press the <SELECT> button.
Press ▲▼ to switch between the items

2 )

as below.

Eco

Restricts some functions in

standby mode to reduce power

consumption.

Network

Does not restrict functionality

even in standby mode.