Panasonic PT-LW25HU User Manual

- ENGLISH

Settings

Lamp power

This function allows you to change brightness of the

screen.

Press ▲▼ to select [Lamp power] and

1 )

then press the <SELECT> button .
Press ▲▼ to select one among the

2 )

modes as below.

You can also press the <LAMP> button to

display [Lamp power].

High

Brighter than the Normal mode.

Normal Normal brightness.

Eco

Lower brightness reduces the

lamp power consumption and

extends the lamp life.

Remote control

This switching function prevents remote control

interference when operating several projectors or

video equipment at the same time.

Press ▲▼ to select [Remote control].

1 )

Press ► or the <SELECT> button.

2 )

Press ▲▼ to select one among the

3 )

seven codes.

This projector provides 7 different remote

control codes: [ALL], [Code 1]~[Code 6].

Attention

When operating the projector under [ALL] code, you can

operate several projectors at the same time. If you want

to operate the projector independently, you must switch

to other code.

When different codes are set on the projector and on the

remote control, any operation cannot be made. In that

case, switch the code on the remote control to fit the

code on the projector.

If the batteries are removed from the remote control for a

long period of time, the remote control code will be reset.

Security

This function allows you to use the [Key lock] and [PIN

code lock] function to set the security for the projector

operation.

Press ▲▼ to select [Security].

1 )

Press ► or the <SELECT> button to

2 )

access the submenu.

Key lock

This function locks the control panel and remote

control buttons to prevent operation by unauthorized

persons.

Press ▲▼ to select the desired items

1 )

as below.

Unlocked.

Lock the operation of the control

panel. To unlock, use the remote

control.
Lock the operation of the remote

control. To unlock, use the control

panel.

PIN code lock

This function prevents the projector from being

operated by unauthorized persons and provides the

following setting options for security.

Press ▲▼ to select the desired items

1 )

as below.

Off

Unlocked.

On1

Enter the [PIN code] every time

turning on the projector.

On2

Enter the [PIN code] to operate

the projector once the power cord

is disconnected; as long as the

AC power cord is connected, the

projector can be operated without

a PIN code.

Attention

Whenever you change the PIN code lock setting or the

[PIN code] (the four-digit number), you are required to

enter the [PIN code]. The "1234" is set as the initial [PIN

code] at the factory.

PIN code change

The [PIN code] can be changed to your desired four-

digit number.

Press ▲▼ to select [PIN code change]

1 )

and then Press <SELECT> button.

Current Pin code dialog box appears.

Press ▲▼ to enter the current code.

2 )

Press ► button to fix the number and

move the red frame pointer to the next

box.

The [New PIN code] input dialog box appears.

Repeat these steps to set a new [PIN

3 )

code].

Setting