Panasonic D6KE User Manual

 Removing the projection lens 

1. Switch off the POWER button on the projector.
2. Rotate the lens cover counterclockwise and remove.

3. While pressing the lens release button, rotate the 

projection lens counterclockwise, and remove the 
projection lens.

 Attaching the projection lens to 

1. Switch off the POWER button on the projector.



When the lens cover is attached, rotate counterclockwise 
and remove.

2. Align the guide of the projection lens with the guide 

groove in the projector, and then insert the lens.

3. Rotate the projection lens clockwise until it clicks into 

place.

4. To attach the slot, align the slot of the lens cover (see *1) 

with the arrow tip located on the body of the projector 
(see *2). Rotate clockwise until it reaches the arrow’s 
end mark   (see *3) to attach.

• Do not touch the lens signal receiver. Dust or dirt may cause 

defective contact.

• Do not touch the surface of the projection lens with your bare 

hands.

• Store the replaced lens where it will be free from vibration and 

impact.

Lens cover

Projection lens

Lens release button

• Make sure the projection lens is attached securely by rotating 

the projection lens counterclockwise.

Lens cover