Panasonic PT-AE3000E User Manual
22 -
E
NGLISH
B
asi
c Op
c Op
eration
Projecting an image
1. Switch on the connected devices.
Press the play button of the required device.
2. Press the INPUT SELECT button to select the
required input method if needed. See “Switching
the input signal” on page 28.
the input signal” on page 28.
The image will be projected on the screen.
1. Press the ASPECT button to select the required
2. Adjust the projected image with the lens shift dials.
3. Adjust the angle of the projector.
Screw down the front leg adjusters and adjust the
angle vertically.
angle vertically.
4. Adjust the focus and the projected image size.
Press +/- of the FOCUS and ZOOM buttons to
adjust.
adjust.
Press the LENS button to adjust the focus and zoom
by the remote control. See “LENS CONTROL” on
page 40.
by the remote control. See “LENS CONTROL” on
page 40.
Selecting the input signal
NOTE:
• AUTO SEARCH is ON as default and the signal from
the connected devices is detected automatically. See
“AUTO SEARCH” on page 43.
“AUTO SEARCH” on page 43.
Positioning the image
NOTE:
• Do not touch the air exhaust port as this may cause
burns or injury.
• If keystone distortion occurs, see “KEYSTONE” on
• If you adjust the focus, you may need to adjust the size
of the image by pressing the ZOOM button again.