Panasonic PT-RZ470UW User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 87
6) Press qw to switch [PARITY].
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
When using existing projector control commands
Set each item when controlling the projector from a computer using control commands of a previously purchased Panasonic projector. Existing
Panasonic projector control software and other software can still be used.
1) Press as to select [RS-232C].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[RS-232C] screen is displayed.
3) Press as to select [EMULATE].
4) Press the <ENTER> button.
5) Press as to select an item.
4) Press the <ENTER> button.
5) Press as to select an item.
[DEFAULT]
RZ470 series, RW430 series, RZ370 series, RW330 series
[D3500]
D3500 series
[D4000]
D4000 series
[D/W5k SERIES]
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
[D/W/Z6k SERIES]
DZ770 series, DW740 series, DX810 series, DW730 series, DX800 series, DZ6710 series, DZ6700
series, DW6300 series, D6000 series, D5000 series, DZ570 series, DW530 series, DX500 series
[L730 SERIES]
L730 series, L720 series, L520 series
[L780 SERIES]
L780 series, L750 series
[L735 SERIES]
L735 series
[L785 SERIES]
L785 series
[F/W SERIES]
FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370]
LZ370 series
[LB/W SERIES]
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78
series, LB75 series
[VX500 SERIES]
VW435N series, VW430 series, VX505N series, VX500 series, VW330 series, VX400NT series,
VX400 series, VX41 series
[EZ570 SERIES]
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D]
VW431D series
6) Press the <ENTER> button.
7) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
7) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
Note
f
Refer to “<SERIAL IN> terminal” (x page 127).
f
When [DIGITAL LINK] is selected, communication using that serial terminal is only available when the corresponding device (such as the
optional digital interface box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN> terminal.
f
When transferring logos via the optional digital interface box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set
to “OFF” to avoid cutting off communication.
f
When [DIGITAL LINK] is selected, communication speed is fixed to 9 600 bps.
[FUNCTION BUTTON]
Display the functions that are currently assigned to the <FUNC1> - <FUNC3> buttons on the remote control. Also, cancel the assigned
settings.
Canceling the assigned settings of the <FUNC1> - <FUNC3> buttons
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[FUNCTION BUTTON] screen is displayed.