Panasonic PT-RZ470UW User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 89
Setting audio input when HDMI input is selected
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[AUDIO SETTING] screen is displayed.
3) Press as to select [HDMI].
4) Press qw to switch [HDMI].
4) Press qw to switch [HDMI].
f
The items will switch each time you press the button.
[HDMI AUDIO]
Outputs HDMI audio.
[AUDIO IN]
Outputs audio connected via the <AUDIO IN> terminal.
Note
f
If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.
Setting audio input when DIGITAL LINK input is selected
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[AUDIO SETTING] screen is displayed.
3) Press as to select [DIGITAL LINK].
4) Press qw to switch [DIGITAL LINK].
4) Press qw to switch [DIGITAL LINK].
f
The items will switch each time you press the button.
[DIGITAL LINK AUDIO]
Outputs DIGITAL LINK audio.
[AUDIO IN]
Outputs audio connected via the <AUDIO IN> terminal.
Note
f
If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.
[STATUS]
Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[STATUS] screen is displayed.
3) Press qw to switch the pages.
f
The page will change each time you press the button.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[PROJECTOR RUNTIME]
Displays the operation times of the projector.
[INTAKE AIR TEMP.]
Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]
Displays the status of the internal temperature of the projector.
[NUMBER OF ENTRY
SIGNAL]
Displays the number of registered signals.
[EMULATE]
Displays the [EMULATE] settings.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[MAIN VERSION]
Displays the main version of the firmware of the projector.
[SUB VERSION]
Displays the sub version of the firmware of the projector.
[NETWORK VERSION]
Displays the network version of the projector.