Princeton 4300 User Manual
Chapter 4
System Setup
39
39
Note: Systems are now shipped with fittings that allow you to select
either a right angle or straight port configuration.
Figure 15. PI-SCX:4300 and PI-SCX:4096 Camera Back Panel
Do not disturb the Vacuum Pumping fitting or the Indium-tipped Vacuum Seal on the
PI-SCX:4300. Damage to the vacuum fittings and seals could void your warranty. Refer
servicing to qualified personnel and contact the factory Customer Support for guidance.
Detailed information about the vacuum system is provided in Appendix C.
3. Fill the circulator with a mixture of 50% ethylene glycol and 50% water.
3. Fill the circulator with a mixture of 50% ethylene glycol and 50% water.
Service Notes
There are no user-serviceable components inside the ST-133 or the fiberoptic taper camera.
Refer servicing to qualified personnel and contact the factory Customer Support for guidance.
Contact information is provided in the Warranty & Service section of the manual.
Caution