Princeton 4300 User Manual

Chapter 7 

Troubleshooting 

73 

 

 

73 

If there is an installed Princeton Instruments (RSPI) high speed card in the host computer 

and you want to operate a camera using the USB 2.0 interface, the PVCAM.INI file 

(created by RSConfig.exe) must exist and the USB 2.0 supported camera must be 

[Camera_1]. PVCAM.INI, which contains information required to identify the 

interface/camera, is referenced by the Hardware Wizard when you are setting up 

WinView/32 with USB for the first time. If the Wizard did not find a PVCAM.INI file or 

if RSConfig.exe was run but the USB 2.0 camera is [Camera_2] in the PVCAM.INI file, 

"Demo", "High Speed PCI", and "PCI(Timer)" will be selectable from the Wizard's 

Interface dialog. 

 

At this point, you will need to run the RSConfig.exe program: 

1.  If you have not already done so, close WinView/32. 
2.  Make sure the ST-133 is connected to the host computer and that it is turned on.  
3.  Run RSConfig from the 

 menu or from 

the directory where you installed WinView. 

4.  When the RSConfig dialog (Figure 39) appears, you can change the camera 

name to one that is more specific or you can keep the default name "Camera2". 

When you have finished, click on the Done button. You will next edit the 

generated PVCAM.INI file.