Cabletron Systems pmn User Manual
Chapter 5: Local Management
5-52
2M46-04R/2M46-04RDC User’s Guide
5.15.3
Image File Download Using Runtime
To download a new firmware image into FLASH using Runtime, proceed
as follows:
as follows:
1.
Use the arrow keys to highlight the Download Method field.
2.
Use the SPACE bar to select RUNTIME.
3.
Use the arrow keys to highlight the Reboot After Download field.
4.
Use the SPACE bar to select either YES or NO. Select YES if you
want the device to reboot after the download is completed. Select NO
if you want the device to store the new image in FLASH memory until
the device is reset or during the next power-up.
want the device to reboot after the download is completed. Select NO
if you want the device to store the new image in FLASH memory until
the device is reset or during the next power-up.
5.
Use the arrow keys to highlight the TFTP Gateway IP Addr field.
6.
Set the IP address of the TFTP gateway server (this defaults to the
same IP address as that set in the TFTP Gateway IP Addr field on the
General Configuration screen).
same IP address as that set in the TFTP Gateway IP Addr field on the
General Configuration screen).
7.
Use the arrow keys to highlight the Download Server IP field.
8.
Enter the IP address of the TFTP server using the DDN format.
For example: 134.141.79.121
9.
Use the arrow keys to highlight the Download File Name field.
10.
Enter the complete path and file name of the image stored on the
download server.
download server.
For example: /tftpboot/2M46.fls
11.
Use the arrow keys to highlight EXECUTE at the bottom of the screen
and press ENTER. The message “RUNTIME DOWNLOAD. WILL
COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the
event message line at the top of the screen and the new image is
downloaded into FLASH memory.
and press ENTER. The message “RUNTIME DOWNLOAD. WILL
COMMIT TO FLASH. REBOOT IN PROGRESS...” displays in the
event message line at the top of the screen and the new image is
downloaded into FLASH memory.