Cabletron Systems pmn User Manual

Chapter 5: Local Management

The following definitions briefly explain each field of the Port Redirect 
Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports.

Destination Port (Read-only)

Shows which ports are currently set as destination ports.

Remap Errors (Read-only)

Shows whether destination ports are receiving errored frames and valid 
traffic (ON) or just valid traffic (OFF).

n] (Selectable)

Allows a selected port [n] to be changed to a source port.

n] (Selectable)

Allows a selected port [n] to be changed to a destination port.

Errors (Toggle)

Allows the user to configure the source ports to send errored frames and 
valid traffic to selected destination ports (ON), or to drop errored frames, 
and send only valid traffic to the destination ports (OFF). The default 
setting of this field is ON.

Status (Selectable)

Allows the addition or deletion of source and destination ports selected in 
the Source Port [n] and Destination Port [n] fields.

There can be more than one Port Redirect Function screen depending on 
the number of port redirect entries. Each screen displays up to 10 port 
redirect entries. If there is more than one screen of redirect entries, the 
NEXT and/or PREVIOUS command is displayed at the bottom of the 
screen, allowing the user to navigate to either the next or previous screen.