Cabletron Systems SEH-22 User Manual

3-1

This chapter outlines the procedure for attaching the SEH to a network as 
either a stackable or standalone device. Ensure that the network meets the 
guidelines and requirements outlined in Chapter 2, Installation 
Requirements/Specifications, before installing the SEH.

Unpack the SEH as follows:

1. Remove the shipping material covering the SEH in the shipping box.

2. Carefully remove the SEH from the shipping box.

3. Remove the SEH from the protective plastic bag and set it aside to 

prevent damage.

4. Visually inspect the SEH. If there are any signs of damage, contact 

Cabletron Systems Technical Support immediately.

The SEH may be installed on a tabletop or shelf, or in a 19-inch rack, and 
configured as a standalone or stacked hub.

Refer to Section 3.2.1 for information concerning a tabletop or shelf 
installation. Section 3.2.2 describes the rackmount installation.

SEH Book  Page 1  Tuesday, March 19, 1996  4:12 PM