Cabletron Systems SEHI-22FL User Guide

2. Enter the subnet mask into this field. The format for this entry is 

XXX.XXX.XXX.XXX with values for XXX being from 0 to 255.

3. Press ENTER.

4. Use the arrow keys to highlight the SAVE option, then press ENTER 

or F6. The “SAVED OK” message appears indicating that the changes 
have been saved to memory.

The Default Gateway field allows the user to identify the router through 
which the SEHI will be forwarding IP packets. 

Use the following steps to set the Default Gateway:

1. Use the arrow keys to highlight the Default Gateway field.

2. Enter the gateway default mask in this field. The format for this entry 

is XXX.XXX.XXX.XXX with values for XXX being from 0 to 255.

3. Press ENTER. If the entry is accepted as a valid default gateway, 

“OK” appears to the right of the field.

4. Use the arrow keys to highlight the SAVE option, then press ENTER 

or F6. The “SAVED OK” message appears indicating that the changes 
have been saved to memory.

Use the following steps to override the Disable Port settings and enable 
all ports in the stack:

1. Use the arrow keys to highlight the Port Enable Override field.

2. Press ENTER to toggle from the default setting of “OVERRIDE 

DISABLED” to “OVERRIDE ENABLED.”

3. The adjacent field displays “Y/N.” Enter Y to continue enabling all 

ports, or N to discontinue the port enable override. The message 
“PORT ENABLED” appears after Y is entered.

The first time an attempt is made to exit the screen without 
saving the changes, a “NOT SAVED?” message is displayed. 
The edits are lost if the user proceeds to exit without saving the 
changes.

SEHI Book  Page 13  Friday, April 19, 1996  10:46 AM