Cabletron Systems SEHI-22FL User Guide
Chapter 7: Local Management
7-14
SEHI User’s Guide
Exiting the Configuration Screen
Use the following steps to exit the Configuration screen and return to the
Feature Selection screen:
Feature Selection screen:
1. Press the appropriate Function key. To return to the Feature Selection
screen, use the arrow keys to highlight the RETURN command.
2. Press ENTER. The Feature Selection screen appears.
7.7
THE TRAP TABLE SCREEN
Access the Trap Table screen from the Features Selection screen using the
arrow keys to highlight the Component Trap Table option, then press
ENTER or F8. The screen shown in Figure 7-6 appears.
arrow keys to highlight the Component Trap Table option, then press
ENTER or F8. The screen shown in Figure 7-6 appears.
Figure 7-6
Trap Table Screen
The Trap Table defines the management stations that will receive SNMP
Traps for alarm/event notification. The following sections explain each
field on the Trap Table screen and instructions on how to change them.
Traps for alarm/event notification. The following sections explain each
field on the Trap Table screen and instructions on how to change them.
SNMP Community Name
Displays the community name included in the trap message sent to the
network management station with the associated IP address.
network management station with the associated IP address.
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
TRAP TABLE
SAVE COMMUNITY NAMES IP TABLE SNMP TOOLS RETURN
F6 F7 F8 F9
Traps
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
N
N
N
N
N
N
N
N
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SNMP Community Name
IP Address
1490_25
SEHI Book Page 14 Friday, April 19, 1996 10:46 AM