Cabletron Systems TSX-1620 User Manual

Using the TSX-1620 Hub View

2-20

Managing the Device

Figure 2-10. The Console Config Window

The Hardware field at the top of the window displays your serial port’s hardware 
type. To configure your serial port:

1.

Select your serial port’s speed by clicking on the menu button in the Speed 
field to display the Speed selection menu. Select the desired port speed from 
the menu. The menu will disappear, and your selection will be displayed in the 
menu button. Available speed selections are 1200, 2400, 4800, 9600, 19200, 
or 38400 bits per second.

2.

Select the number of bits in a character for the port by clicking on the menu 
button in the Bits Per Char field to display the Bits Per Character selection 
menu. Select the desired number of bits per character (7 or 8) from the menu. 
The menu will disappear, and your selection will be displayed in the menu 
button.

3.

Select the number of stop bits (one, one and a half, or two) for the port by 
clicking on the menu button in the Stop Bits field to display the Stop Bits 
selection menu. Select the desired number of stop bits from the menu. The 
menu will disappear, and your selection will be displayed in the menu button.

4.

Select the parity of the port by clicking on the menu button in the Parity field 
to display the Parity selection menu. Select the desired sense of parity (none, 
odd, even, mark, or space) from the menu. The menu will disappear, and your 
selection will be displayed in the menu button.