DELL PC6224F User Manual
1090
Clock Commands
•
priority — Priority assigned to the server. (Range: 1–8)
Default Configuration
No servers are defined.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 SNTP servers can be defined.
Use the sntp client enable command in Global Configuration mode to
Use the sntp client enable command in Global Configuration mode to
enable unicast clients globally.
Polling time is determined by the sntp client poll timer <64-1024> global
Polling time is determined by the sntp client poll timer <64-1024> global
configuration command.
Example
The following example configures the device to accept Simple Network Time
Protocol (SNTP) traffic from the server at IP address 192.1.1.1.
console(config)# sntp server 192.1.1.1
sntp trusted-key
Use the sntp trusted-key command in Global Configuration mode to
authenticate the identity of a system to which Simple Network Time Protocol
(SNTP) will synchronize. To disable authentication of the identity of the
system, use the no form of this command.
Syntax
sntp trusted-key
key-number
no sntp trusted-key
key-number
•
key-number — Key number of authentication key to be trusted. (Range:
1–4294967295)