DELL PC6224F User Manual
1268
Syslog Commands
Example
The following example limits messages logged to the console based on
severity level "alert".
console(config)#logging console alert
logging facility
Use the logging facility command in Global Configuration mode to set the
facility for logging messages. To reset to the default value, use the no form of
the command.
Syntax
logging facility
facility
no logging facility
•
facility — The facility that will be indicated in the message. (Range:
local0, local1, local2, local3, local4, local5, local 6, local7)
Default Configuration
The default value is local7.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the logging facility as local3.
console(config)#logging facility local3
logging file
Use the logging file command in Global Configuration mode to limit syslog
messages sent to the logging file based on severity. To cancel the buffer, use
the no form of this command.