DELL PC6224F User Manual
1270
Syslog Commands
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages to the
various destinations, such as the logging buffer, logging file, or syslog server.
Logging on and off for these destinations can be individually configured using
the logging buffered, logging file, and logging <server>global configuration
commands. However, if the logging on command is disabled, no messages are
sent to these destinations. Only the console receives messages.
Example
The following example shows how logging is enabled.
console(config)#logging on
logging snmp
Use the logging snmp command in Global Configuration mode to enable
SNMP Set command logging. To disable, use the no form of this command.
Syntax
logging snmp
no logging snmp
no logging snmp
Default Configuration
Disabled.
Command Mode
Global Configuration mode
User Guidelines
To see SNMP Set command logs use the show logging command.
Example
console(config)#logging snmp