DELL PC6224F User Manual

IGMP Snooping Commands

The timeout should be more than sum of response time and twice the query 

interval.

The following example configures the host timeout to 300 seconds.

console(config-if-1/g1)#ip igmp snooping host-time-

out 300

Use the ip igmp snooping leave-time-out command in Interface 

Configuration  mode to configure the leave-time-out. If an IGMP report for a 

Multicast group is not received within the leave-time-out period after an 

IGMP leave was received from a specific port, the current port is deleted from 

the member list of that Multicast group. To configure the default leave-time-

out, use the no form of this command.

ip igmp snooping leave-time-out [

time-out | immediate-leave]

•

time-out  —  Specifies the leave-time-out in seconds. (Range: 1 - 3174)

•

immediate-leave — Specifies that the port should be removed 

immediately from the members list after receiving IGMP Leave.

The default leave-time-out configuration is 10 seconds.

Interface Configuration (Ethernet, port-channel) mode