DELL PC6224F User Manual

LLDP Commands

•

transmit-interval — The interval in seconds at which to transmit local data 

LLDPDUs. (Range: 5–32768 seconds)

•

hold-multiplier — Multiplier on the transmit interval used to set the TTL 

in local data LLDPDUs. (Range: 2–10)

•

reinit-delay — The delay in seconds before re-initialization. (Range: 1–10 

seconds)

The default transmit interval is 30 seconds.
The default hold-multiplier  is 4.
The default delay before re-initialization is 2 seconds.

Global Configuration mode

This command has no user guidelines.

The following example displays how to configure LLDP to transmit local 

information every 1000 seconds.

console(config)#lldp timers interval 1000

The following example displays how to set the timing parameter at 1000 

seconds with a hold multiplier of 8 and a 5 second delay before re-

initialization.

console(config)#lldp timers interval 1000 hold 8 

reinit 5