DELL PC6224F User Manual

LLDP Commands

By default, management address information is not included.

Interface Configuration (Ethernet) mode

This command has no user guidelines.

The following example displays how to include management information in 

the LLDPDU.

console(config-if-1/g3)#lldp transmit-mgmt

Use the lldp transmit-tlv command in Interface Configuration mode to 

specify which optional type-length-value settings (TLVs) in the 802.1AB basic 

management set will be transmitted in the LLDPDUs. To remove an optional 

TLV, use the no form of this command.

lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
no lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]

• sys-name — Transmits the system name TLV
• sys-desc — Transmits the system description TLV
• sys-cap — Transmits the system capabilities TLV
• port desc — Transmits the port description TLV

By default, no optional TLVs are included.

Interface Configuration (Ethernet) mode