DELL PC6224F User Manual

VLAN Commands

This command changes a dynamically created VLAN (one that is created by 

GVRP registration) to a static VLAN (one that is permanently configured and 

defined). The ID is a valid VLAN identification number. VLAN range is 2-

4093.

 vlan makestatic 

vlan-id

•

vlan-id — Valid vlan ID. Range is 2–4093.

This command has no default configuration.

VLAN Database Mode

The dynamic VLAN (created via GRVP) should exist prior to executing this 

command. See the Type column in output from the show vlan command to 

determine that the VLAN is dynamic.

The following changes vlan 3 to a static VLAN.

console(config-vlan)#vlan makestatic 3

Use the vlan protocol group command in Global Configuration mode to add 

protocol-based groups to the system. When a protocol group is created, it is 

assigned a unique group ID number. The group ID is used to identify the 

group in subsequent commands. Use the no form of the command to remove 

the specified VLAN protocol group name from the system.
If multiple vlan protocol groups are created, this command deletes one of the 

groups, and then saves the configuration. The older implementation of this 

command resulted in incorrectly applying the group IDs on reload. So, the