DELL PC6224F User Manual

VLAN Commands

To remove the protocol from the protocol-based VLAN group identified by 

groupid, use the no form of this command.

vlan protocol group add protocol <

groupid> ethertype <value>

no vlan protocol group add protocol <

groupid> ethertype <value>

•

groupid — The protocol-based VLAN group ID, which is automatically 

generated when you create a protocol-based VLAN group with the 

protocol group command. To see the group ID associated with the name 

of a protocol group, use the 

show port protocol all command.

•

ethertype — The protocol you want to add. The ethertype can be any valid 

hexadecimal number in the range 1536 to 65535.

This command has no default configuration.

Global Configuration mode

This command has no user guidelines.

The following example displays how to add the "ip" protocol to the protocol 

based VLAN group identified as "2."

console(config)#vlan protocol group add protocol 2 

ethertype 0xXXXX