DELL PC6224F User Manual

IPv6 Routing Commands

The following example sets the default distance to 80.

console(config)#ipv6 route distance 80

Use the ipv6 unicast-routing command in Global Configuration mode to 

enable forwarding of IPv6 unicast datagrams.

Disabled is the default configuration.

Global Configuration mode

This command has no user guidelines.

The following example globally enables Ipv6 unicast datagram forwarding.

console(config)#ipv6 unicast-routing

console(config)#no ipv6 unicast-routing

Use ping ipv6 command in Privileged EXEC mode to determine whether 

another computer is on the network. To use the command, configure the 

switch for network (in-band) connection. The source and target devices must 

have the ping utility enabled and running on top of TCP/IP. The switch can 

be pinged from any IP workstation with which the switch is connected