DELL PC6224F User Manual

IPv6 Routing Commands

through the default VLAN (VLAN 1), as long as there is a physical path 

between the switch and the workstation. The terminal interface sends three 

pings to the target station. 

 {ip-address | hostname} [size size] 

•

ipv6-address — Target IPv6 address to ping.

•

hostname — Hostname to ping (contact). (Range: 1–158 characters)

•

size — Size of the datagram. (Range: 48–2048 bytes)

This command has no default configuration.

Privileged EXEC mode

This command has no user guidelines.

The following example determines whether another computer is on the 

network at the IPv6 address specified.

console(config)#ping ipv6 2030:1::1/64

Send count=3, Receive count=0 from 2030:1::1/64

Average round trip time = 0.00 ms

Use ping ipv6 interface command in the Privileged EXEC mode to 

determine whether another computer is on the network. To use the 

command, configure the switch for network (in-band) connection. The 

source and target devices must have the ping utility enabled and running on 

top of TCP/IP. The switch can be pinged from any IP workstation with which 

the switch is connected through the default VLAN (VLAN 1), as long as there