DELL S50V User Manual

|

Force10 Service Agent

www.dell.com | support.dell.com

The minimal FTSA configuration is four steps:

1. Enable FTSA. See page 348.

2. Specify the SMTP server to which FTSA will send E-mails upon a trigger event. See page 349.

3. Specify the source E-mail address that FTSA should use when generating E-mails. See page 349.

4. Enable the FTSA messaging service for the default recipient (see page 350,) or:

a

a

The following configuration tasks are optional, but perform them so that FTSA messaging functionality is 
fully enabled.

•

•

•

FTSA is disabled by default.

The system displays 

configuration.

Enable FTSA. 

•

If FTSA is disabled when you execute this command, then FTOS 
starts the FTSA service and enters the CALLHOME context.

•

If FTSA is enabled when you enter this command, FTOS only enters 
the CALLHOME context.

CONFIGURATION

Disable FTSA. 
Note: This command deletes the FTSA configuration from the 
running-config. To disable the FTSA messaging function only, use the 
command 

 from CALL HOME mode.

CONFIGURATON

Message 1  FTSA Enabled/Disabled

%RPM0-P:CP %CALL-HOME-3-CALLHOME: Call-home service started

%RPM0-P:CP %CALL-HOME-3-CALLHOME: Call-home service ended.